Meltblown Cloth Extruder Machine 1600Mm
| Min. Order: | 1 Set/Sets |
|---|
| Packaging: | The wooden case |
|---|---|
| Brand: | YIHONG |
| Transportation: | Ocean |
| Place of Origin: | China |
| Port: | SHANGHAI |
Product Description
Our products cover all kinds of polyester and polypropylene spunbond nonwoven equipment, including single S nonwoven production line, SS spunbond equipment, SSS spunbond equipment, meltblown production line, SMS, SMMS, SSMMS composite production line; The equipment runs stably , High yield and high efficiency, the produced spunbond non-woven fabric spreads evenly.
YH-M type meltblown non-woven fabric production line can produce PP, PET, fiber non-woven fabrics, focusing on non-woven products with good absorbency and high elasticity. The non-woven production line runs stably, and the production of non-woven fabrics is uniform, strong and breathable.
M Meltblown Non-Woven Fabric Production Line Process flow
M Meltblown Nonwoven Production Line The main technical parameters
| MODEL | UNIT | YH-M1600 | YH-M2400 | YH-M3200 |
| Effective Fabric Width | mm | 1600 | 2400 | 3200 |
| Original Fabric Width | mm | 1700 | 2550 | 3410 |
| Daily Capacity (based on 25gsm) | ton | 1.6 | 2.8 | 3.8 |
| Max Diameter of Fabric In Roll | mm | 1000 | 1000 | 1000 |
| Monofiilament Fineness | denier | 2~5 | 2~5 | 2~5 |
| GSM of Fabric | g/m2 | 13~80 | 13~80 | 13~80 |
| Max Production Speed | m/min | 100 | 100 | 100 |
| Process Production Speed | m/min | 10~100 | 10~100 | 10~100 |
| Total Installation Power | kw | 500 | 680 | 830 |
| Machiney Dimension(L*W*H) | meter | 12*8*8 | 14*8*8 | 16*8*8 |
| Installation Site Iimension(L*W*H) | meter | 18*12*10 | 20*14*10 | 20*16*10 |
| Total Net Weight Of Machine(appox) | ton | 40 | 78 | 95 |
Structure principle and precautions of meltblown non-woven production line
Meltblown non-woven fabric is different from traditional spunbond production. It uses high-speed hot air to stretch the polymer trickle from the spinneret hole of the module, and turns it into an ultra-fine short The fiber is guided to the roller and cooled to form by its own adhesive force.
Its production process is a flow process, from the loading and unloading of polymer materials, to the melting and extrusion of materials, after the metering of the metering pump, the special spinneret hole module is used to spray, and the high-speed hot air blows the spray. The trickle of the polymer coming out of the wire hole is properly stretched and guided. After cooling, it is formed on the roller, and the material is received and processed in one go. Any problem in any link may cause production interruption. Solve processing problems.
Application field
Product application of meltblown nonwovens
1) Filter material: The meltblown cloth material produced by the meltblown nonwoven production line has the advantages of fine fibers, many pores and small pore size.
2) Medical and health materials: Meltblown non-woven materials can effectively block blood, body fluids, alcohol and
The penetration of bacteria, while the microfiber structure can ensure the smooth passage of sweat vapor.
3) Environmental protection materials: polypropylene meltblown nonwovens have hydrophobic and lipophilic properties and microfiber structure
And become a good oil absorbing material, and resistant to strong acid and alkali, the density is lower than that of water, and can float on the water for a long time after oil absorption
Without deformation, it can be recycled and stored for a long time.
4) Clothing material: The melt-blown non-woven fabric in the melt-blown composite thermal insulation material has a microfiber structure,
Therefore, it has strong wind resistance and good thermal insulation.
5) Battery diaphragm material: polypropylene material has excellent acid and alkali resistance, polypropylene meltblown diaphragm, the material has the characteristics of small pore size, large porosity, small electric anode and various product changes.
- 1
- 2
- 3
- 4
- 5
Changzhou Puyisen Machinery Technology Co., Ltd. is located in Wujin District, Changzhou, a long-standing and culturally rich Yangtze River Delta Economic Zone. It is close to Shanghai and Nanjing, with superior geographical location, good investment environment and fast and convenient transportation. Our company is specialized in manufacturing and selling, polypropylene spunbond non-woven fabric production equipment, polyester filament needle punched non-woven fabric production line, meltblown non-woven fabric production equipment. Pu Yisen Technology has independently developed and innovated, and successfully developed non-woven fabric punching machines, plastic film ultra-micro punching equipment and hot-pressing equipment, as well as air-permeable and water-impermeable ultra-micro hole punching equipment for packaging materials.
- Company Name: Changzhou Puyisen Machinery Technology Co., Ltd.
- Representative: Yuanle Chen
- Product/Service: Non Woven Fabric Machine , Spunbond Non-woven Fabric Line , Melt Blown Machine , Melt Blown Non Woven Fabrics Line , PP Spunbond Non Woven Machine , Needle Roll Punching Machine
- Capital (Million US $): 5000000RMB
- Year Established: 2018
- Total Annual Sales Volume (Million US $): US$2.5 Million - US$5 Million
- Export Percentage: 41% - 50%
- Total Annual Purchase Volume (Million US $): Below US$1 Million
- No. of Production Lines: 20
- No. of R&D Staff: 11 -20 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: no
- Factory Size (Sq.meters): 3,000-5,000 square meters
- Factory Location: 18 Wenya Road, Qianhuang Town, Wujin District
- Contact Person: Ms. HX
- Tel: 86--15380453786
Premium Related Products
